Compressor Oil 100

DIN 51506 VD-L

Product Description:

The Compressor Oil ISO 100 is a premium quality, low carbon forming, ash free compressor oils. Lubricants for compressors vary dependent upon the type of compressor (e.g. reciprocating, rotary, screw) and also the gas being compressed (e.g. air, nitrogen and refrigerants etc.). With these features firmly in mind the Cyclone HT range of compressor oils have been designed for a large variety of manufacturers’ specifications and requirements. The Cyclone HT range of compressor oils are manufactured using carefully selected mineral oils. Inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones and anti-wear additives protect all the mechanical parts in the compressor. Cyclone HT oils are designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.

Benefits:

• Excellent oxidation stability • Low evaporation and carry over

Application:

Cyclone Compressor oil ISO 100 is recommended for the lubrication of reciprocating (piston) type compressors. The Cyclone 100 can be used in sliding vane applications where oils of these viscosities are required. It is vitally important when selecting the required lubricant that the equipment manufacturer’s recommendation is adhered to. Always comply with the manufacturer’s drain periods.

Product Specification:

DIN 51506 VD-L ISO 6743-3 DAA (ISO 100, 150)

Typical Test Data:

ISO VG	100
Appearance	Amber
Specific Gravity @ 15.6°C	0.888
Kinematic Viscosity @40°C (cSt)	100.0
Kinematic Viscosity @100°C (cSt)	11.4
Viscosity Index	100
Pour Point (°C)	-11
Flash Point (°C	227